TEL: 01202 820177
FAX: 01202 814011
sales@theglue.co.uk

How to find us...

Glossary

               Tradelock Adhesives

Tradelock anaerobic threadlockers and sealants; are a specially formulated range of products developed for industrial and commercial use and have proven to be of the highest quality.  The Tradelock product is accepted throughout industry and has been tested and approved.

 

 

B222

Screw Lock. Purple, low strength product for securing small precision screws in metal, brass and aluminium.

B243

Nut Lock. Blue, medium strength removable type treadlocker for metal parts, nuts, bolts, etc.  Works on plated fasteners, zinc and cadmium.

B270

Stud Lock. Red, permanent high strength locker for medium to large studs. For ultimate locking and vibration proofing.

B290

Lock Penetrator. Green, very low viscosity grade with high strength locking ability for penetraion into assembled fasteners.

B641

Bearing Fit. Yellow, medium strength retention on bushes, bearings, liners, keys, etc.  Used on parts requiring disassembly.

B601

Retainer High Strength Compound. Green, standard grade retainer for high strength retaining of slip and press parts.  *Also available B603 (Oil Tolerant).

B648

High Temperature Retainer. Green, high temperature (200C) retainer compound for positive retention.

B638

High Strength Retainer. Green, ultimate dynamic strength for severe locking and retaining applications.

B660

Metal Fill Silver Retainer. Silver, metal like compound for taking up worn / gap fill needs. Used to rebuild slightly worn metal parts.

B542

Hydraulic Thread Sealer. Brown, High pressure sealing of threaded connections to 20mm.  Will not clog hydraulic and pneumatic systems.

B574

Duraform Orange Gasket. Orange, gasket eliminator for close fitting parts. Eliminates the use of paper, cork and fibre gaskets sealing instantly.

B510

Duraform Red Gasket Hi-Temp. Red, a high temperature version of Duraform Orange.  Resistance up to 180C.

B572

Instant Pipe Sealant with slow locking strength. A special instant low pressure sealant with the benefit of a new 48 hour locking period prior to solidifying completely to allow adjustment.

B577

Pipe Sealant Yellow with Teflon. Yellow, instant low pressure seal for pipe fittings up to 2 diameter rated up to 10,000 PSI after cure.

B495

Instant Adhesive. B495s instant industrial quality surface is the most general purpose cyanoacrylate, bonding plastics, metal, ceramincs and elastomers in seconds.

B496

Metal Parts Bonding. Medium or high viscosity.  Standard industrial strength cyanoacrylate, versatile, instant bonding of plastics, rubber, ceramic, metals, etc.

B416

Gap Filling 1500cps. A thickened fast curing ethyl; instant adhesive that bonds most common materials and fills gaps.

B401

Instant Adhesive. Versatile surface insensitive, all purpose product with excellent bonds forming on wood, leather, paper, metals, plastics, ceramics and most elastomers.

B405

Toughened and most versatile. We highly recommend B405 as a general purpose product. Out performs all others for strength and humidity resistance.

B454

Thick Paste High-Temp 120C Bonder. Based on our new technology this bond gel comes in 20g tubes.

B406

Fast Set Superglue. Best performance on difficult rubbers such as E.P.D.M., SBR, extended temperature ability up to 120C.

B460

Low Odour, Low Fume, Cosmetic Finish. A new technology instant adhesive with a very low odour, gives excellent clean, clear bonds in seconds.

B416

Cyanoacrylates. Industry standard superglues for a multitude of tasks.  Available in low, medium and high viscosities.

B420

B424

Tradebond

Tradegrip

Tradelock

Trademelt

TradePUR

Tradeseal

Tradesolve

Tradetack

Tradeweld